Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

iDRAC 8/7 v2.40.40.40 RACADM CLI Guide

PDF

Using The Autocomplete Feature

Use the Autocomplete feature to:
  • Display all the available RACADM commands in the alphabetical order on pressing the Tab key at the prompt.
  • View the complete list, enter the starting letter of the command at the prompt and press Tab key.
  • Navigate the cursor within a command, press:

    Home key: directs to the starting of the command.

    End key: directs to the end of the command.

  • View the history of the commands that were run in the current session, press up and down arrow key.

  • Exit the Autocomplete mode, enter Quit, Exit, or press Ctrl+D key.

For example:   

  • Example 1 : racadm> <press tab>
    arp
                                        autoupdatescheduler
                                        clearasrscreen
                                        clearpending
                                        closessn
                                        clrraclog
                                        .
                                        .
                                        .
                                        .
                                        .
                                        .
                                        .
                                        vflashsd
                                        vflashpartition
                                        vmdisconnect
                                        cd
                                        quit
                                     
  • Example 2: racadm> get <press tab>
    get
                                        getconfig
                                        getled
                                        getniccfg
                                        getraclog
                                        getractime
                                        getsel
                                        getsensorinfo
                                        getssninfo
                                        getsvctag
                                        getsysinfo
                                        gettracelog
                                        getversion
                                        
                                     
  • Example 3 :
    racadm> getl<press tab>
    racadm> getled <press enter> or <racadm getled>
                                        LEDState: Not-Blinking 
                                     
  • Example 4 :
    racadm>> get bios.uefiBootSettings
                                        BIOS.UefiBootSettings
                                        BIOS.UefiBootSettings.UefiBootSeq
                                        BIOS.UefiBootSettings.UefiPxeIpVersion
                                     
  • NOTE: In the RACADM autocomplete mode, some of the RACADM commands specific to certain server platforms may not be available. In such scenarios, execute the RACADM command in the normal execution mode.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\